PE80 PE Bag
2023-12-22
APEL/PEL Anti-static /zipper Bag
2023-12-22
MDNL120 Vacuum ESD Shielding Bag
Product Description：
The Vacuum ESD Shielding Bag is laminated by combining depositioned aluminum polyester film, nylon film and low density polyethylene film, and finished up with surface antistatic processing. The appearance of the Vacuum ESD Shielding Bag is semi-transparent that can increase product recognition. The Vacuum ESD Shielding Bag can effectively isolate static electricity and moisture, providing full protection for your products.
This product is applicable to vacuum-purposed product, semiconductor, electronic chip, optic components, LCD, and all electronic components that are sensitive to static electricity and moisture.
| Electrical Properties : | Typical Values | Test Procedures / Method |
| Surface Resistivity： | ||
| Outer Surface | <1012 ohms/sq | EOS/ESD-S11.11-2001 |
| Metallic Layer | 100 ohms/sq | EOS/ESD-S11.11-2001 |
| Inner Surface | <1012 ohms/sq | EOS/ESD-S11.11-2001 |
| Charge Decay | Less than 0.05 second | FTMS-101C Method 4046.1 |
| Physical Properties : | Typical Values | Test Procedures / Method |
| Bag Thickness: | ||
| Polyester Layer | 12 Mic | ASTM D-2103 |
| Metalized Layer | 100 Angstroms | ASTM D-2103 |
| Nylon Layer | 15 Mic | ASTM D-2103 |
| Polyethylene Layer | 90 Mic | ASTM D-2103 |
| Total Thickness | 120 Mic | ASTM D-2103 |
| Tensile Strength-TD | 505.1 kgf/cm2 ±10% | ASTM D882 |
| Tensile Strength-MD | 624 kgf/cm2 ±10% | ASTM D882 |
| Puncture Strength | ≧11kgf | FTMS 101C Method 2065.1 |
| Tear Strength-TD | 1.1 kgf | ASTM D1004 |
| Tear Strength-MD | 1.0 kgf | ASTM D1004 |
| Water Vapor transmission | 4.1218 g/m2.day ±1g | ASTM E96 |
| Elongation-TD | 143.50 % | ASTM D882 |
| Elongation-MD | 111.60 % | ASTM D1004 |
| Heat Sealing Conditions | ||
| Temperature | 108 ℃~220℃ | |
| Time | 0.5~3.5 seconds | |
| Pressure | 30~70 PSI |
If the latest semi-finished or finished inventory details, test data and/or product specifications are needed, please contact our sales.
