Sontara® MicroPure SL is a high quality cleanroom wipe made from unique fibers which are only available from Sontara®. With excellent absorbency and purity, Sontara® MicroPure SL is specially designed for general purposes of Class 100 (Class M3.5 and ISO Class 5) or above.
How the wipes are made
When using dust-free wipes, the wipe material itself may create polluting particles (These pollutants are almost invisible)
Dust particles created by the material itself
Ions
Fibers
Crystals
Foreign pollutants on the material
Sontara® MicroPure Cleanroom Wipes can minimize these pollutants Sontara® MicroPure Cleanroom Wipes has excellent dry wiping and dust picking performance (because wiping dry = wiping clean)
Excellent moisture absorption Sontara® MicroPure Cleanroom Wipes itself is made of high liquid absorption material.
Sontara® MicroPure Wipes
Double knit edge banding polyester cleaning wipes
Tested according to IES RP CC 004.2
Low Content Ions and Extractables Main feature - Low content ions and extractables
Use Sontara® MicroPure Cleanroom Wipes with the correct methods to achieve the best cleaning results.
‧Main features:
Excellent absorbent capacity (418 mL/m2) and absorbency rate (7680 mL/m2/s).
Outstanding purity – low lint, no binders or chemical additives, biodegradable.
Excellent dynamic wiping efficiency (98.3%) of 10MM particle challenge) – the key function of cleanroom wipes – leaves surfaces clean and dry.
‧Ingredients:
100% Lyocell
‧Weight:
50g / m2
‧Application:
ISO standard class 7 (FS 209 standard class 10,000) or higher level cleanroom.
Cleaning liquid spills.
Cleaning of precision components and experimental instruments.
General cleanroom maintenance, suitable for the places that require good moisture absorption.
Size and Packaging:
8 "x 8" (10.2 x 10.2 cm x 2) - 80 wipes / bag - 36 bags / cartons
Recommended models (Applicable to all MicroPure wipes) * Based on the risk of pollution on the cleaning surface resulted from the manufacturing process. Risk evaluation based on: the distance from the production line, the airflow position, the production line sensitivity, existence of other pollution sources etc.
Scratch sensitivity of the surface
Boundless, smooth surfaces
Bounded, smooth surfaces
Boundless, rough surfaces
Bounded, rough surfaces
Low
Micropure AP or SL
Micropure AP or SL
Micropure AP or SL
Micropure AP
Medium
Micropure 100
Micropure 100
Micropure 100
Micropure 100
High
Micropure LP
Micropure LP
Micropure LP
Micropure LP
Comparison of Sontara® MicroPure Cleanroom Wipes with similar products on the market
Thickness
Roughness
Cleanliness
Absorption rate
Absorption capacity
Deforms after absorption
Price
Particle generation
Sontara®
Thick
Fine
High
Fast
High
No
Cheap
Low
Similar products
Thin
Coarse
Low
Slow
Low
Yes
Expensive
High
Sontara® property sheet
Property
MP SL
MP AP
MP 100
MP LP
Test Method
Composition
Lyocell
Woodpulp/ polyester
Woodpulp/ polyester
Lyocell/ polyester
Basis weight oz/yd2(g/m2)
1.5 (51)
2.0(68)
1.65(56)
2.0(68)
ASTM D1117 Sec 17
Sheet Grab Tensile
MD lbs (N)
21.4 (95)
35.0(165)
31.0(138)
46.5(207)
ASTM D1117 Sec 7
XD lbs (N)
15.1 (67)
20.0(89)
15.0(67)
30.3(135)
ASTM D1117 Sec 7
Absorption Capacity
Intrinsic Ai mL/g
8.20
4.27
4.76
6.85
ASTM D6651-01
Extrinsic Ae mL/m2
418
276
267
465
ASTM D6651-01
Absorption Rate
Intrinsic Ri mL/g/s
150
34.0
38.0
27.1
ASTM D6651-01
Extrinsic Re mL/m2/s
7680
1755
2100
1833
ASTM D6651-01
Particles
Po MM/m2
5.80
12.1
9.2
2.5
IES-RP-CC004.2
BAS MM/m2
22.7
80.0
46.0
8.3
IES-RP-CC004.2
Gelbo 1000/ft3
45.2
1.6
1.1
INDA IST160. 1-92
Extractables
Water, H2O %
0.23
0.10
0.05
0.05
IES-RP-CC004.2
Ispropyl Alcohol, IPA %
0.02
0.03
0.03
0.04
IES-RP-CC004.2
Ions
Na ppm
22
18
13
5
IES-RP-CC004.2
Fe ppm
0
2
2
2
IES-RP-CC004.2
Mg ppm
50
69
45
29
IES-RP-CC004.2
K ppm
11
9
8
4
IES-RP-CC004.2
Ca ppm
356
333
313
231
IES-RP-CC004.2
Fiber loss pcs(≧50μm)/ppm/m2
0.22
0.65
0.56
0.12
ASTM D6652-01
Above data are for reference only. If the latest test information is needed, please contact our sales.
Low Content Ions and Extractables
