中文 ∣ English
logo
logo
Packaging Materials
PP Corrugated Plastic
Static Eliminator Brush
Tyvek®
Tyvek® Tyvek Fabric Application
Sontara® Non-Woven
Lighting Products
Lubricant
Damp-Proofing Accessories
Material Processing

Packaging Materials
DD150 ESD Moisture Barrier Bag
enlarge photo
Item number: DD150
product description:
DD150 ESD Moisture Barrier Bag is laminated by combining polyester film, aluminum foil, nylon film and low density polyethylene film, and finished up with surface antistatic processing. The DD150 ESD Moisture Barrier Bag can effectively isolate static electricity and moisture.
 
This product is applicable to vacuum-purposed product, semiconductor, electronic chip, optic components, PCB, LCD, and all electronic components that are sensitive to static electricity.

Specifications:

Electrical Properties : Typical Values Test Procedures/
Method
Surface Resistivity:
Outer Surface ≦1011  ohms/sq EOS/ESD-S11.11-2001
Metallic Layer 100 ohms/sq EOS/ESD-S11.11-2001
Inner Surface ≦1011  ohms/sq EOS/ESD-S11.11-2001
Charge Decay Less than 0.03 second FTMS-101C Method 4046.1
Physical Properties : Typical Values Test Procedures/
Method
Bag Thickness:    
Polyester Layer 12 Mic ASTM D-2103
AL Layer 6 Mic ASTM D-2103
Nylon Layer 15 Mic ASTM D-2103
Polyethylene Layer 110 Mic ASTM D-2103
Total Thickness 150 Mic ASTM D-2103
Tensile Strength-TD 449 kgf/cm2 ASTM D882
Tensile Strength-MD 545 kgf/cm2 ASTM D882
Puncture Strength 12.6 kgf FTMS 101C Method 2065.1
Tear Strength-TD 2.7 kgf ASTM D1004
Tear Strength-MD 2.6 kgf ASTM D1004
Oxygen transmission ≤0.43 cc/m2.day ASTM D3985
Water Vapor transmission ≤0.03 g/m2.day ASTM F1249
Elongation-TD 59.60 % ASTM D882
Elongation-MD 66.60 % ASTM D882
Heat Sealing Conditions    
Temperature 108 ℃~220℃  
Time 0.5~3.5 seconds  
Pressure 30~70 PSI  
Seal Strength 10.8kgf/15mm ASTM F88
Item CAS NO. Test Method
Test
Results
Detected
Limit
Unit
Fluorine(F) 007782-41-4 Analysis was
performed by IC
N.D. 50 ppm(mg/kg)
Potassium(K+) 024203-36-9 Analysis was
performed by IC
N.D. 0.001 ug/cm2
Ammonium(NH4+) 014798-03-9 Analysis was
performed by IC
0.002 0.001 ug/cm2
Phosphate(Po43-) --- Analysis was
performed by IC
0.002 0.001 ug/cm2
Chromiun(Cr) 007440-47-3 Analysis was
performed by ICP-MS
N.D. 0.001 ug/cm2

If the latest semi-finished or finished product inventory details, test data and/or product specifications are needed, please contact our sales.

previous page
logo
logo
聯絡信箱
光影數位科技.設計製作