GD80 Conductive Grid Bag is made with low density polyethylene bag printed with conductive inks. The transparent appearance of the GD80 Conductive Grid Bag allows customers to see through the packaging, thereby increasing product recognition. The grid of conductive ink can quickly and effectively eliminate static electricity.
This product is applicable to PCB, and all electronic products that are sensitive to static electricity.
L(±8mm) W(±5mm) Width from 9cm ~ 48cm Thickness from 0.03mm ~ 0.2mm
Electrical Properties:
Typical Values
Test Procedures/ Method
Surface Resistivity:
Outer Surface
104~106 ohms/sq
EOS/ESD-S11.11
Charge Decay
Less than 0.2 second
FTMS-101C Method 4046.1
Physical Properties:
Typical Values
Test Procedures/ Method
Bag Thickness
80 Mic
ASTM D-2103
Conductive grid Layer
3 Mic
ASTM D-2103
Density
0.95 g/ml
ASTM D1505
Heat Sealing Conditions
Temperature
108 ℃~220℃
Time
0.3~3.5 SECONDS
Pressure
20~50 PSI
Product can be customized to match the customer specification (size, thickness, color). Customizations require a minimum ordering quantity. If the latest specifications, inventory size and/or test datas are needed, please contact our sales.
Semi-finished product:
Width cm ×
Length cm ×
Thickness mm
8
4~180
0.08
10
4~180
0.08
13
4~180
0.08
15
4~180
0.08
18
4~180
0.08
20
4~180
0.08
22
4~180
0.08
24
4~180
0.08
26
4~180
0.08
28
4~180
0.08
30
4~180
0.08
Semi-finished product sizes may change depending on physical inventory.