中文 ∣ English
logo
logo
Packaging Materials
PP Corrugated Plastic
Static Eliminator Brush
Tyvek®
Tyvek® Tyvek Fabric Application
Sontara® Non-Woven
Lighting Products
Lubricant
Damp-Proofing Accessories
Material Processing

Packaging Materials
DD200 ESD Moisture Barrier Bag
enlarge photo
Item number: DD200
product description:
DD200 ESD Moisture Barrier Bag is laminated by combining polyester film, aluminum foil, nylon film and low density polyethylene film, and finished up with surface antistatic processing. After being vacuumed, the DD200 is more resistant to damage by external force, it effectively isolates static electricity and moisture, and provides full protection for your products.
 
This product is applicable to semiconductor, electronic chip, optic components, LCD, and all electronic components that are sensitive to static electricity and moisture.

Specifications:

Electrical Properties: Typical Values Test Procedures/
Method
Surface Resistivity:
Outer Surface ≦1011 ohms/sq EOS/ESD-S11.11-2001
Metallic Layer 100 ohms/sq EOS/ESD-S11.11-2001
Inner Surface ≦1011  ohms/sq EOS/ESD-S11.11-2001
Charge Decay Less than 0.03 second FTMS-101C Method 4046.1
Physical Properties : Typical Values Test Procedures/
Method
Bag Thickness:    
Polyester Layer 23 Mic ASTM D-2103
AL Layer 6 Mic ASTM D-2103
Nylon Layer 15 Mic ASTM D-2103
Polyethylene Layer 150 Mic ASTM D-2103 
Total Thickness 200 Mic ASTM D-2103
Puncture Strength 17.2 kgf FTMS 101C Method 2065.1
Water Vapor transmission ≤ 0.03 g/m2.day ASTM E96
Heat-seal strength 11.3 kgf/15mm CNS 10591
Heat Sealing Conditions    
Temperature 108 ℃~220℃  
Time 0.5~3.5 seconds  
Pressure 30~70 PSI  
Item CAS NO. Test Method Test
Results
Detected
Limit
Unit
Fluorine(F) 007782-41-4 Analysis was
performed by IC
N.D. 50 ppm(mg/kg)
Potassium(K+) 024203-36-9 Analysis was
performed by IC
N.D. 0.001 ug/cm2
Ammonium(NH4+) 014798-03-9 Analysis was
performed by IC
0.002 0.001 ug/cm2
Phosphate(Po43-) --- Analysis was
performed by IC
0.002 0.001 ug/cm2
Chromiun(Cr) 007440-47-3 Analysis was
performed by ICP-MS
N.D. 0.001 ug/cm2

We provide customized laminating material for a variety of product requirements (minimum ordering quantity required). If the latest test data are needed, please contact our sales. We will provide the latest inventory and product specification that matches your needs.

previous page
logo
logo
聯絡信箱
光影數位科技.設計製作