The Vacuum ESD Shielding Bag is laminated by combining depositioned aluminum polyester film, nylon film and low density polyethylene film, and finished up with surface antistatic processing. The appearance of the Vacuum ESD Shielding Bag is semi-transparent that can increase product recognition. The Vacuum ESD Shielding Bag can effectively isolate static electricity and moisture, providing full protection for your products.
This product is applicable to vacuum-purposed product, semiconductor, electronic chip, optic components, LCD, and all electronic components that are sensitive to static electricity and moisture.
Specifications:
Electrical Properties :
Typical Values
Test Procedures/ Method
Surface Resistivity:
Outer Surface
≦1011 ohms/sq
EOS/ESD-S11.11-2001
Metallic Layer
100 ohms/sq
EOS/ESD-S11.11-2001
Inner Surface
≦1011 ohms/sq
EOS/ESD-S11.11-2001
Charge Decay
Less than 0.05 second
FTMS-101C Method 4046.1
Physical Properties :
Typical Values
Test Procedures/ Method
Bag Thickness:
Polyester Layer
12 Mic
ASTM D-2103
Metalized Layer
100 Angstroms
ASTM D-2103
Nylon Layer
15 Mic
ASTM D-2103
Polyethylene Layer
90 Mic
ASTM D-2103
Total Thickness
120 Mic
ASTM D-2103
Tensile Strength-TD
505.1 kgf/cm2
ASTM D882
Tensile Strength-MD
624 kgf/cm2
ASTM D882
Puncture Strength
11.52 kgf
FTMS 101C Method 2065.1
Tear Strength-TD
1.1 kgf
ASTM D1004
Tear Strength-MD
1.0 kgf
ASTM D1004
Water Vapor transmission
4.1218 g/m2.day
ASTM E96
Elongation-TD
143.50 %
ASTM D882
Elongation-MD
111.60 %
ASTM D882
Heat Sealing Conditions
Temperature
108 ℃~220℃
Time
0.5~3.5 seconds
Pressure
30~70 PSI
If the latest semi-finished or finished inventory details, test data and/or product specifications are needed, please contact our sales.
